Your shopping cart is empty.
An active lime scale remover to remove alkaline salts and water scales from automatic dishwashing machine. KITCHEN & BATHROOM CLEANER , lime eater dissolves hard and old lime scale deposits from your appliances. It extends the life of the appliance and saves running cost. It can be used in appliances such as Washing Machines, Dish Washers, Geysers, Steam Iron, Coffee Makers, Bath Tubs, Bathroom Fixtures etc.
It is a blend of surfactants, chelating agent, organic thickener, quaternery halide, phosphoric acid and perfume.
It is the ultimate in washroom cleaning and can be used on toilets, sinks and showers without fear of damage to the finish on stainless steel.
It is excellent for use on terazzo and quarry tiled floors, leaving all areas fresh, gleaming and clean.
It does not contain any harsh abrasives and afteruse leaves a pleasent fragrance.
The correct quantities of RXSOL-11-1052-025 requirement for descaling will depend upon the character and thickness of scale deposits. For regular de-scaling of dish washing machines prepare a 2 – 4% solution with cold water, and fill the tank just below the overflow level, heat the mixture and allow to run machine until lime scale deposits disappear.
Apply full strength to highly contaminated areas where spray does not reach. Drain the tank and fill with cold water and run the machine for 5 minutes and flush with water until the outlet water shows neutral pH. Good results are obtained when descaling is done at 60 Deg. C.
Dip tank method can be used for brightening aluminum, stainless steel equipments and utensils. Prepare a 3 – 5% solution of RXSOL-11-1052-5 with water and soak the utensils for a while to obtain a bright surface. Wash thoroughly with cold water and rinse dry.
PROCEDURE FOR SCALE CLEANING for HOUSE HOLD :: --
1. Combine one part water and one part with RXSOL-15-1052-5 . Place the mixture in the pot, kettle or coffeemaker (where you normally put water).
2. Bring the diluted RXSOL-15-1052-5 solution to a boil in pots and kettles. Turn the stove off once the mixture comes to a boil. Allow the mixture to cool in the pot or kettle overnight.
3. Empty the RXSOL-15-1052-5 solution from the pots the following day. Scrub away any remaining lime scale using a mildly abrasive cleaning pad.
4. Run a cycle on coffeemakers so that the RXSOL-15-1052-5 solution works through all parts of the machine, then run clear water through the machine two or three times to flush out any RXSOL-15-1052-5 residue.
TYPICAL METHOD :-- HOW TO CLEAN KETTLE SCALE ?
That unsightly white, chalky substance in your kettle is called lime scale. It is a result of built-up calcium deposits that occur when water with high calcium levels evaporates, like when you boil water in your kettle. Although lime scale is not harmful, if you don't wash it out, it can build up and eventually clog your kettle's spout.
PROCEDURE :
1> Fill the kettle with a half cup of RXSOL-15-1052-025
2> Add two cups of water.
3> Heat the kettle until the liquid boils. Let it boil for a few minutes.
4> Empty the kettle.
5> Rinse the kettle with fresh water. Repeat Steps 1 through 4 if any lime scale remains on the kettle.
6> Wash the kettle before you use it.
A kettle that is full of lime-scale not only looks terrible, but takes longer to boil and wastes electricity. This easy to follow the instruction it will show you how to Descale your kettle to achieve optimum and economical performance.
Step 1: You will need:
Step 2: Why bother
A kettle that is full of lime-scale not only looks terrible, but takes longer to boil and wastes electricity, because the scale prevents the element conducting heat well. Eventually the element can burn out if it is not de-scaled, so you'd have to throw it out and get a new kettle.
Step 3: What to use
You can use white vinegar or citric acid, which ever you have available to you.
Step 4: What about de-scalers?
There are commercial de-scalers available, but make sure that they are specifically approved for use on kettles and are not metal de-scalers. If you choose to use them, do follow the manufacturer's instructions.
Step 5: Make up the mixture
If you are using vinegar, dilute it with water in a 50:50 ratio. If you are using citric acid, mix 30g with 500ml of water.
Step 6: Using vinegar to de-scale
Vinegar should be left in the kettle for 1 hour, without boiling.
Step 7: Using lemon juice to de-scale
Pour the lemon juice in to the kettle and boil. Leave the kettle to cool before emptying it.
Step 8: Using lemons to descale
If your kettle only needs mild de-scaling, you can try quartering a lemon, filling the kettle with water and putting in the lemon. Boil the kettle once or twice, and leave to soak until the water has cooled.
Step 9: Wipe down
If there is any limescale left in the kettle, you can wipe it down with a small amount of bicarbonate of soda on a damp cloth. Let the element cool down, and unplug the kettle before you do this.
Step 10: Rinse
Fully rinse the kettle with fresh water at least 5 times before using again.
RXSOL-11-1052-5 is a mild descaling liquid suitably designed to remove lime, food films and water scales from metallic and plastic surfaces in food processing operations. It attacks the built up calcium, magnesium or iron scales instantly and removes the scales. It finds extensive applications in de-liming machines, steam tables, cleaning stainless steel and iron equipments, floors, shower stalls, tiles, walls or any surface to be cleaned from scale deposits. It contains a mixture of liquid acids inhibited to arrest its attack on metals. It will not attack plastic, hard metal or any other surfaces, if used as directed.
In India and UAE, we are Machine Descaler manufacturer. And holding name as a reputed brand RXSOL Machine Descaler supplier in Mumbai, Nerul, Navi Mumbai, Rabale, Mahape, Kandla, Gandhidham, Surat, Goa, Manglore, Kakinada, Vizag, Ennore, Chennai, Kolkata, Haldia, Fujairah, Dubai, Abu Dhabi and entire Middle East. We are Machine Descaler exporter for Singapore and Africa.