Your shopping cart is empty.
Very effective water - based cleaner for use in hold cleaning and general digressing. its heavy molecular surfactants rapidly reacts with water and produce effective cleaning solution .May be applied by brush, hand spray and by high and low pressure cleaninng machines.
It contains wetting agents ,penetrating agents & alkaline materials with heavy molecular surfactants. non caustic tank cleaner suitable for veg oil.
For degreasing and removal of residues of mimerals oil , coal stain and soot from surface.
Procedure-of-Use:
General-Cleaning:- RXSOL-20-3002-025 is not suitable for use with Aluminum, Magnesium and Zinc Silicate coatings can be used for all types of cleaning & degreasing & may be applied by brush, hand spray, high & low pressure washing machines etc.
Tank Cleaning : For removal of residues of Minerals,Animals,Vegetable or Fish oil, Waxes & Soot from systems.
For Cargo Tanks to Remove Soot from Systems :-
1.Spray RXSOL-20-3002-025 on with a high pressure cleaning machine and use1:6 with water.If used with hand sprayer,spray the product concentrate onto the surface,allowing 1 lit. for every 10-12 m2.Use a 5-8% solution in a tank washing machine.
2.Leave for about 30-60 minutes. The surface should be kept wet.
3.Wash down with hot water (80°C) and check the cargo tank.
4.Repeat the procedure if necessary.
Refer to technical datasheet. and the Material Safety Data Sheet before use. Always refer to any warning, instructions and labels supplied with the products.
Methods-of-Application-and-Dose Rates :-
1.Injection method for tank washing machines.Dose rate 1-10 Ltrs.per ton wash water 0.11%
2.Circulation method. Dose rate 1-10 litres per ton wash water (0.1-1%).
3.Direct Spot cleaning.Handspray concentrate or diluted with up to 5 parts water & leave for several minutes
before rinsing off with clean water.
All chemical products should be handled with care. Protective clothing and respiratory equipment should be used where necessary.