Your shopping cart is empty.
Marine Chemcials classified as HEAVY OIL CLEANER EMULSIFIER Advanced tank cleaner and degreaser classified product. Gives effective cleaning and gas-freeing of double bottom, deep, and fuel oil tanks due to its concentrated emulsifier blend with petroleum solvents. Specially formulated for cleaning of oily greasy surface of tanks. to emulsify all types of oils using hot or cold processes. Also suitable cleaning of spills on deck, ships side, piers, engine room wharfs, etc
HEAVY OIL CLEANER EMULSIFIER, Cleaning Chemical Supplier in INDIA / UAE
RXSOL HEAVY OIL CLEANER EMULSIFIER is formulated for cleaning double bottom, deep and wing tanks used for petroleum fuel oils. Aromatic chain compound have special feature and its chain bonding in molecules are very strong, so its cleaning always required special type of cleaner.
Our team is continiously working on daily problem faced by customer, and observed that after using of HEAVY OIL CLEANER EMULSIFIER all oil base compound are emulsifed and cleaned out. But if tanks / vessel are required complete removal of hydrocarbon even traces, smell from tank surface then repetition of tank cleaning through RXSOL-16-1011-210 .
Directions for Use and Dose Rates: RXSOL-20-2002-025 is specially formulated for cleaning double bottom, deep and wing tanks etc, used for fuel oils. It can also be used for local cleaning and degreasing of engine rooms and on deck.
Soak Method: for heavy soil put parts into undiluted RXSOL-20-2002-025, for general soiling use a solution of 10-30% RXSOL-20-2002-025 in water. Parts should be soaked for at least 30 minutes before washing off with water.
Spraying Method: Use neat RXSOL-20-2002-025 over all soiled areas. Allow 10-20 minutes for reaction , then rinse with high pressure water hose., Scrubbing will assist the cleaning operation for stubborn deposits.
Rock and Roll Method: Recommended time to clean and gas-free under normal circumstances would be 3-6 days ,for cleaning of double bottom tanks at sea.
1.First of all heat the remaining oil in tanks .
2.By stripping constantly. flush the tank with sea water,
3.Close all suction and discharge valves .
4.1stDose Fill the tanks by ½ to 1 litre RXSOL-20-2002-025 per tone of water through pipe or manhole, for 75-80% of capacity of tank to be cleaned.
5.Then fill tank to 25% capacity with sea water, raise the temperature up to 60°C maximum, and maintain this temperature for 24 hours.
6.Top up tank to 75-80% capacity with sea water, continue to heat for 48 to 72 hours.
7.Discharge and strip tank. Fill to 50-60% capacity with sea water and allow 2 hours rinsing time.
8.Discharge tank and strip, flushing tank with sea water for 2 hours,stripping continuously. When completed, inspect tank to ascertain if second cleaning is required. If so:
9.For completion add second dose of RXSOL-20-2002-025, fill tank with sea water 75-80% capacity and raise the temperature to 60°C maximum. Maintain this for 48 to 72 hours. And recirculate the solution .
10.Discharge and strip tank, flush with sea water, stripping continuously for 2 hours.
11.To gas-free, fill tank with sea water to overflow through vents and sounding pipes, discharge and strip completely
Highly concentrated solvent emulsifying product easily emulsify solvent and petroleum product. This products are classified as a degreaser and tank cleaner.