Extremely high solvency and penetrating capabilities to remove carbonaceous residue formed by fuel and other petroleuium based product. RXSOL-16-1003-020 is a highly concentrated Wetting Emulsifying Agent.Specifically formulated for removal of completely carbon, grease, oil, varnishes and other heavy deposits from diesel engine
This powerful action is based on a two – Layer mechanism. The top-layer prevents the evaporation of the volatile components in the button-layer. The button –layer removes the deposited substances. This way, the deposits are bind and trapped resulting to complete and safe removal.
For removal of carbon deposits it must be used concentrated ,contained in a steel immersion bath.
SAFETY AND HANDLING:- Completely Avoid contact with eyes as irritation may occur. Do not take internally. In case of contact with eyes, flush eyes immediately and cupiously with clean running water for 15- minutes and seek medical attention.
Depending upon the contamination deposition either concentrated or diluted.
Dilution : Use 1 part concentrate to 2-10 parts of water to yield a very effective end product. The components and machine parts are then dipped into the solvent / solution for 30 min. to 1 hr. Heavy deposition may need 12-24 hours , parts must be taken out from the bath and washed thoroughly with a high- pressure water supply jet system.
Conncentrated : RXSOL-16-1003-020 Carbon Remover Cleaner is most effective product in its category due to its quick and complete action. Concentrated Carbon Remover can be applied for cleaning of highly soiled components on blocks, gear boxes, pistons, rings, valves, atomizers, pipes, burners, coolers, cylinder heads, injectors, tubes, oil filters , old paint and lacquers ), Finally can be rinse with water or Wipe off.
Non- evaporation prevents loss of chemical.
CHARACTERISTICS :-