Your shopping cart is empty.
RXSOL -16-1007-025 is a specially product formulated by strong emulsifying agents, surfactants and powerful solvents to treat metal and ceramic oil filters, which suffer from oil depositions, carbonized oil accumulation and sludge. Heavy duty liquid , which is Extremely and effectively removes tenacious carbon deposits, burnt grease, Oily residues and lacquers , from fuel oil and lube oil purifiers, filters, separators. Very usefull to clean fuels recipitation of paraffin and asphalt or with lubricating oils mixing of different types of oil can form solid encrustations on the mesh. It is heavy duty emulsifying liquid , which is Extremely and effectively removes tenacious carbon deposits, burnt grease, Oily residues and lacquers , from fuel oil and lube oil purifiers, filters, separators. Effective cleaning of fine meshes is achieved by soaking in RXSOL-16-1074-025 followed by blasting with compressed air using a cleaning gun.
The Rxsol -16-1007-025 to be used depends on two factors: the volumetric capacity of the filter to be cleaned and the degree of deposition/contamination in the filter. In the first case, the dosage must equal the filter capacity. In the second case, the dosage must be corresponding to the desired degree of cleaning.
Application and use :
The RXSOL -16-1007-025 to be used depends on two factors: the volumetric capacity of the filter to be cleaned and the degree of deposition/contamination in the filter. In the first case, the dosage must equal the filter capacity. In the second case, the dosage must be corresponding to the desired degree of cleaning.
RXSOL -16-1007-025 use by the circulation or immersion method. If using the circulation method, determine the filter capacity and circulate at a constant rate for 6–20 hours. If using the immersion method, let the filter soak in enough quantity of Rxsol -16-1007-025, analogous to the degree of contamination, for a time of 6–20 hours. The Temperature of Cleaning solution should not be allowed to exceed 60 °C.
Cleaning process and requirement of time depends on the type of the contamination. With fuels recipitation of paraffin and asphalt or with lubricating oils mixing of different types of oil can form solid encrustations on the mesh.
RXSOL -16-1007-025 can be undercooled or overheated during storage but remains fully usable when returned to normal temperature.
MESH CONTAMINATED WITH HEAVY OIL:
Elements contaminated with heavy oil must be soaked in a standard commercial aromatic solvent. After soaking the elements are cleaned by high pressure Cleaning Device using RXSOL-16-1095-025 solution.
May be used directly or diluted in the ratio of 1 part concentrate to 5 parts water, ( or 1 . Ratio of any solvent like diesel ).Rxsol -16-1007-025 use by the circulation or immersion method. If using the circulation method, determine the filter capacity and circulate at a constant rate for 6–20 hours. If using the immersion method, let the filter soak in enough quantity of Rxsol -16-1007-025, analogous to the degree of contamination, for a time of 6–20 hours. The Temperature of Cleaning solution should not be allowed to exceed 60 °C.
Future and Benifit
• Non–corrosive and safe to use in all types andkinds of filters.
• Preserves, protects and maintains the operational capabilities of the filter by thorough and complete cleaning.
• Provides quick and efficient action.
• Its pure, high quality components readily remove oil and grease deposits, even when dry.
• Can be combined with a specific range of products.
• Safe to use on all metals and their alloys as well as those with inorganic clay finishes.
• Attacks and dissolves water/oil emulsions and concentrations.
• Cost effective, easy to apply and use.