Your shopping cart is empty.
RXSOL-40-4027-025 is a superior nitrite based corrosion inhibitor that contains molybdate. It was developed for closed water circulating systems. RXSOL-40-4027-025 is based on a blend of organic and inorganic corrosion inhibitors to protect steel, copper and other non-ferrous metals, making it an ideal treatment for closed chilled water and low pressure heating systems. NOTE - RXSOL-40-4027-025 is NOT suitable for systems containing aluminium.
Dosing of RXSOL-40-4027-025 should be dosed at 1000 - 2000 ml/m3 in order to give an active reserve of 200ppm of sodium nitrite. In systems requiring significant passivation higher initial dosages may be required to yield the required nitrite residual.
RXSOL-40-4027-025 gives complete protection against corrosion andfouling by marine growth such as algae, moss, shellfish andmicro-organisms in seawater cooling systems. It is also usedas an effective biocide to treat diesel engine cooling watersystems against micro-organisms and bacteria.
Anti-foulant and corrosioninhibitor for sea watercooling systems
It should be preferably be started on a clean system since it is formulated to prevent growth rather than remove existing growth of microorganism bacteria , fungi , larvae etc.. ( EXISTING GROWTH CAN BE CLEAN BY USING RXSOL-11-1008--DC / RXSOL-54-1008-SA )
Dosing of RXSOL-40-4027-025 should be dosed at 1.5-2.0 kg/m3 in order to give an active reserve of 55-75 mg/L molybdate (as Mo04).
For sea water cooling systems
Dose 150 – 500 ML of RXSOL-40-4027-025 for every 100 tons of sea water flowing through the system per hour. The treatment should be applied daily when the vessel is on coastal waters. Normally the treatment is not required when sailing deep sea . 3 PPM of RXSOL-40-4027-025 is sufficient to prevent fouling.
FRESH WATER COOLING WATER
RXSOL-40-4027-025 is also a recommended biocide to be used inconjunction with NCLT COOLINg WATER TREATMENT in case of contamination of microorganisms in the fresh water cooling system. It is effective over a broad pH range and gives awider spectrum of protection against micro-organisms in marine diesel engine cooling system. In this case, 100 PPMof RXSOL-40-4027-025 or 1Ltr for 10 tons of water, added on aweekly basis. The product should be applied to the expansiontank to ensure immediate circulation into the system
# Effectively control MICROORGANISM GROWTH, Prevents marine growth in filterboxes, sea water lines and heatexchangers
# Economical , reduce down time cost , also doesn't require any special monitoring, Consistent usage provides longlasting protection
# Also control biological corrosion
# Filming properties protect systemsagainst corrosion
# Ensures maximum thermalefficiency by keeping heat transfersurfaces free from deposits
# Reduces maintenance and downtime
# Non-toxic and non-pollutant PRODUCT