Product Code ::RXSOL-20-2026-210
Categories: Tank Cleaner-20
Product Short Description: A very strong cleaner, which can be used to soften up / remove baked on drying oils and also used after animal and vegetable oils, fish oils, tall oils, tung oil etc.
Product Description:

A very strong  cleaner, which can be used to soften up / remove baked on drying oils and also used after animal and vegetable oils, fish oils, tall oils, tung oil etc.  It is low toxic product with an exceptional solvency power on soil & oily  matter. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials.

 

Product Application:

Feature and Benefit

· Liquid water based strong alkaline cleaning agent.
· Rxsol G 50 Marine  is a very suitable tank cleaning agent.
· Removes oil, fats, fatty acids and mineral pollution.
· Suitable to use on additives (pure).
· Also used on chemical contamination in tanks.
· Suitable on ferro metals and stainless steel.
· Rxsol G 50 Marine is easily washed out of tanks.
· Can be used with sea water
· Rxsol G 50 Marine  contains a water-hardness stabiliser

Product Dose:

First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of using RXSOL G:50,  is by direct injection followed by recirculation washing, using tank cleaning machines. Spraying Method  - Using RXSOL G:50 as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages.  Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.

** Make sure to take all safety precautions are followed when handling / spraying RXSOL G:50**

 

Injection Method – not applicable.

 

Re-circulation Method :

Fill tank with fresh water and heat up to warm 50 oC .IF a drop line is available on the tank line system, then start to circulate the water and add the required amount of RXSOL G:50 make a 2.5 to 5% solution.  Under normal circumstances, between 2.5% and 4.5% will be sufficient strength.  If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material.

Product Note:

Characteristics & applications

  • liquid water based strong alkaline cleaning agent
  • Rxsol G:50 is a very suitable tank cleaning agent
  • removes oil, fats, fatty acids and mineral pollution
  • suitable to use on additives (pure)
  • also used on chemical contamination in tanks
  • suitable on Ferro metals and stainless steel
  • Rxsol G:50 is easily washed out of tanks
  • can be used in water with high Cl contents
  • Rxsol G:50 contains a water-hardness stabilizer
Hashtag: #MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant #Demulsifier #WaterlessHandCleaner #AirC
Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates