Product Code ::RXSOL-70-7011-020
Categories: Fuel Treatment-70
Product Short Description: Soot Remover is a dry powder compound formulated for safe removal of soot and deposits from boilers and diesel engine exhaust systems.
Product Description:

Soot Remover is a dry powder compound formulated for safe removal of soot and deposits from boilers and diesel engine exhaust systems.

Product Application:

Product Properties

If deposits are allowed to form on heat exchangers, the loss of efficiency can be directly related to extra fuel consumption. A 1 mm deposit is Approximately equivalent to a 10% efficiency loss, a 3 mm deposit can reduce efficiency by up to 50%. The normal ignition temperature of soot is around 600°C. This means that it is burned only in the hottest parts of the boiler or diesel exhaust systems. Due to the catalytic action of Soot Remover, the ignition temperature of the soot/deposit is reduced to less than 280°C. The carbon deposits are thus ignited, leaving an easily removed ash. The use of Soot Remover not only provides greater fuel efficiency, but also prevents acid formation in areas where severe corrosion could result in expensive damage, i.e. heat exchangers, super heaters, economizers, exhaust paths/stacks.

Directions for Use and Dose Rates

Soot Remover should be introduced to the boiler through a suitable port, preferably with a blower, ensuring that the powder is spread through the flame path towards the back of the combustion chamber. For Diesel engines, inject Soot Remover directly into the exhaust system upstream of the area to be treated.

For provides greater fuel efficiency, but also prevents acid formation in areas where severe corrosion could result in expensive damage, i. e. heat exchangers, super heaters, economizers, exhaust paths / stacks.

Product Dose:

Directions for Use and Dose Rates

Soot Remover should be introduced to the boiler through a suitable port, preferably with a blower, ensuring that the powder is spread through the flame path towards the back of the combustion chamber. For Diesel engines, inject Soot Remover directly into the exhaust system upstream of the area to be treated.

For provides greater fuel efficiency, but also prevents acid formation in areas where severe corrosion could result in expensive damage, i. e. heat exchangers, super heaters, economizers, exhaust paths / stacks.

Soot Remover Liquid should be introduced to the boiler through a suitable port, preferably with an injector, ensuring that the liquid is spread through the flame path toward the back of the combustion chamber.

 Boiler

Steam Rased Tons / Hour

Fuel Used Tons/Day

Dose Rate  Kg/ Day

3.00

5.50

1.00

6.00

11.00

2.00

9.00

 16.00

3.00
12.00 21.00

3.50

15.00 27.00

4.00

23.00 41.00

4.50

31.00 55.00

5.00

46.00 82.00

5.50

62.00 110.00

6.50

Diesel Engine

Fuel Consumption Tons/Day

Dose Rate Kg/ Day
10.00

1.50

20.00

3.00

30.00

3.50

40.00

4.00

50.00

4.50

Product Note:

Features, Benefits and Applications:-

  •  Reduces soot and slag deposits
  •  Reduces cold-end corrosion
  •  Improves heat transfer
  •  Increases boiler efficiency
  • Assists soot blowing
Free Delivery / Supply Locations : 
Oman, Bahrain, Abu Dhabi, Ajman, Al Ain, Dubai, Ras Al-Khaimah, Ras al Khaimah, Fujairah, Sharjah, Umm Al Quwain, Fujairah, Ruwais, Mina (Port) Zayed, Khalifa Port, Kizad, Port Rashid, Jebel Ali Port, DP WORLD, Jebel Ali Free Zone, Khor Fakkan Container Terminal, Port Rashid, Jebel Ali Port, Mina Kalid Port, Khor Fhakan Port ( Khawr Fakkan, Khawr al-Fakkan ), Sharjah Creek, Ajman, Port of Hamriyah, Mina Zayed Port, Mussafah port, Khalifa Port, Umm al-Nar Port, Um Al Quwain Port, Saqr Port, Port of Fujairah, Dibba Port, Jebel Dhanna, Mina Al Hamriya, Mina Rashid, All United Arab Emirates