Your shopping cart is empty.
Corrosion Inhibiting Admixture CIA 222 admixture is a state-of-the-art corrosioninhibiting admixture formulated to inhibit the corrosion of steel in reinforced concrete. Corrosion Inhibiting Admixture, RXSOL CIA 222 admixture provides two levels of corrosion protection, making it the most effective corrosioninhibiting admixture available. Corrosion Inhibiting Admixture CIA 222 admixture meets ASTM C 494/C 494M requirements for Type S, Specific Performance, admixtures.
Usage Guideline
Corrosion-Inhibiting System: In order to control corrosion in reinforced concrete, the ACI 318 (ACI 318M) Building Code Requirements for Structural Concrete and Commentary requires certain design considerations, such as limiting the water-cementitious materials ratio, providing adequate concrete cover over reinforcing steel and limiting the initial chloride ion content of the concrete. Additionally, construction practices should be such that a dense, void-free concrete is
obtained.
In addition to the elements of good concrete practice required by the ACI 318 (ACI 318M), RXSOL recommends a corrosion-inhibiting system that inhibits corrosion at multiple levels for maximum protection. The use of MasterLife RXSOL CIA 222 admixture restricts the ingress of chlorides and moisture and additionally slows the onset and rate of corrosion by forming a protective film on the reinforcing steel. Additional protection can be attained through the use of a high-range water-reducing admixture such as RXSOL admixture to provide adequate placability and consolidation at low water-cementitious materials ratios and/or the use of silica fume to further reduce concrete permeability.
Dosage:
RXSOL CIA 222 admixture is recommended for use at a dosage of 1 gal/yd3 (5 L/m3) of concrete for all applications and corrosive environments. RXSOL CIA 222 admixture dosed at 1 gal/yd3 (5 L/m3) is formulated to provide optimum corrosion protection of reinforced concrete structures in severe corrosive environments, and, therefore provides excellent corrosion protection in less severe corrosion environments as well. RXSOL CIA 222 admixture is recommended for use at a single dosage in order to eliminate the confusion and uncertainties related to determining the severity of a corrosive environment and predicting the chloride exposure of the structure. Mixing: RXSOL CIA 222 admixture may be added with concrete batch water. It should not be mixed with any other admixtures prior to being introduced into the concrete mixer. Depending on local materials, mixing efficiency and other conditions, the use of this admixture may require changes in normal batching procedures to facilitate air entrainment.
Product Notes
Corrosivity – Non-Chloride, Non-Corrosive: RXSOL CIA 222 admixture is a corrosion-inhibiting admixture and will neither initiate nor promote corrosion of reinforcing and prestressing steel embedded in concrete, or of galvanized steel floor and roof systems. Neither calcium chloride nor other chloride-based ingredients are used in the manufacture of RXSOL CIA 222
Features :
Benefits
Storage and Handling
Storage Temperature: Store at ambient temperatures above 35 °F (2 °C) but not exceeding 125 °F (52 °C). Precautions should be taken to protect RXSOL CIA 222 from freezing. If product freezes, thaw and reconstitute by mild mechanical agitation. Do not use pressurized air for agitation.
Shelf Life: RXSOL CIA 222 has a minimum shelf life of 9 months. Depending on storage conditions, the shelf life may be greater than stated. Please contact your local sales representative regarding suitability for use and dosage recommendations if the shelfRXSOL CIA 222 has been exceeded.
Packaging :
RXSOL CIA 222 is available in 210 Ltr drums, 1000 Ltr totes, and by bulk delivery.
Additional Information :
For additional information on RXSOL CIA 222 or its use in developing a concrete mixture with special performance characteristics, contact your local sales
representative.
RXSOL CHEMO PHARMA INTERNATIONAL is a global leader of innovative chemistry systems and formulations for construction, maintenance, repair and restoration of structures. The Admixture Systems business provides advanced products, solutions and expertise that improve durability, water resistance, energy efficiency, safety, sustainability and aesthetics of concrete structures, above and below ground, helping customers to achieve reduced operating costs, improved efficiency and enhanced finished products.